View unanswered posts | View active topics It is currently Thu Mar 28, 2024 10:02 am



Reply to topic  [ 3 posts ] 
 wire-wrap PLCC sockets available 
Author Message

Joined: Tue Dec 11, 2012 8:03 am
Posts: 285
Location: California
Aries [correction: Berg Electronics, McKenzie socket division] used to sell WW PLCC sockets which I bought years ago

Image

and when I lamented on 6502.org today that AFAIK no one makes them anymore, BigEd gave us a link to http://uk.rs-online.com/web/c/?searchTe ... ra=oss&r=t which apparently stocks them in many sizes!

Image

Note that they are no bigger than the SMT PLCC sockets.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources


Last edited by Garth on Mon Jan 28, 2013 1:48 am, edited 1 time in total.



Mon Jan 21, 2013 8:03 pm
Profile WWW

Joined: Fri Jan 25, 2013 1:47 pm
Posts: 1
Wow, that`s expensive! I was expecting to see those prices for a Pk of 5 or something!
you Can buy breakout boards cheaper that will give you the DIP spaced pins for less but be carefull of the 44 pin versions that give 40 pin dip, these are fine for some MCUs but not all PLC devices (do check the pinouts for the relevent N/C pins in the corect spaces 1`st).

as a Wire wrapper myself, I find it easier to just buy the ordinary WW pins and PLCC sockets and mount the socket as you would an ordinary chip into the pins, Tons cheaper! and just as effective.
here`s an example: http://www.pyroelectro.com/tutorials/cp ... dware.html

just a thought ;)


Sun Jan 27, 2013 10:28 pm
Profile

Joined: Tue Dec 11, 2012 8:03 am
Posts: 285
Location: California
YT2095 wrote:
Wow, that`s expensive! I was expecting to see those prices for a Pk of 5 or something!
you Can buy breakout boards cheaper that will give you the DIP spaced pins for less but be careful of the 44-pin versions that give 40 pin dip. These are fine for some MCUs but not all PLC devices (do check the pinouts for the relevent N/C pins in the corect spaces 1st).

There are ones like this

Image

but they won't be good for high-speed performance.

Quote:
As a Wire wrapper myself, I find it easier to just buy the ordinary WW pins and PLCC sockets and mount the socket as you would an ordinary chip into the pins, Tons cheaper! and just as effective.
here`s an example: http://www.pyroelectro.com/tutorials/cp ... dware.html

Image

That's a good idea, using the strips like that. What I had envisioned before when you or someone mentioned it was not the strips but the separate pins, but that would be much harder to handle, and probably even more expensive. I think I might epoxy the pin strip to the body of the socket after connecting it. Also, it does not appear to be any thicker.

Image

_________________
http://WilsonMinesCo.com/ lots of 6502 resources


Mon Jan 28, 2013 1:46 am
Profile WWW
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software