View unanswered posts | View active topics It is currently Thu Mar 28, 2024 10:17 pm



Reply to topic  [ 2 posts ] 
 Great British Computers - the Elliott 152 (1948-51) 
Author Message

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1780
A very early real time digital computer, one of the first (ran a program a year before Whirlwind did). One built, one sold. "The 152’s plug-in units were based on printed circuits on glass plates, with plated-through holes, deposited resistors, semiconductor diodes and sub-miniature pentodes. This cutting-edge technology unfortunately became a bleeding edge: the 152’s reliability left much to be desired and the MRS5 contract was eventually curtailed by the Admiralty."
- http://www.cs.man.ac.uk/CCS/res/res42.htm#i

Image
- from this book review

I looked into this as a result of a misdirection, but it's interesting anyway. The machine was to control a battleship's anti-aircraft guns, which means responding to radar in millisecond timeframes, and normally means doing trigonometry too. But there was no time for that. So, the ten-inch optical encoding disks which were read by a photocell were not merely calibrated in fractions of a degree, but were calibrated as trig functions of the angles - the encoding disk acts as a physical lookup table directly. As it happened, they patented this great idea but missed a trick so it was widely used without bringing in revenue.

There's a big expensive book all about Elliott, some of which can be read online:
The Elliott 152 Computer
Technical Details of the Elliott 152 and 153

There's a paper about the 152 and other early Elliott machines here:
Systems architectures for the Elliott 152, 153 and Nicholas computers.
Quote:
The first version of the 152 computer was completed in September 1950. It contained a fast multiplier; a single-word accumulator made from a circulating loop of delay elements with facilities for addition, subtraction, shift and collation (AND); and a double-word (40-bit) accumulator. Data transfers were bit-serial. Arithmetic and logic circuits were based on sub-miniature pentodes (vacuum tubes). Storage was provided by 64 words of CRT (electrostatic RAM) memory, using the anticipation-pulse system invented by F C Williams

As with all early Elliott machines, it was bit-serial - static storage was expensive, even for a few bits, and serial storage technology was available and even favoured (mercury lines, nickel wires, cathode ray tubes, disks.)

The machine operated on fixed-point numbers and had a fast multiplier. It had an overflow bit within the data word, which might be a very nice idea compared to a global overflow bit in a status register. Intended to run at 1MHz, it only went up to 333kHz, which became a standard speed. A multiply took 60 microseconds.

A bit more info here:
http://www.chilton-computing.org.uk/acl ... e/p033.htm
(See the bit starting "I should now like to describe some of our work at Borehamwood.")


Wed Oct 12, 2016 1:13 pm
Profile

Joined: Wed Apr 24, 2013 9:40 pm
Posts: 213
Location: Huntsville, AL
Ed:

Thanks very much for the links. I am looking forward to reading the material.

_________________
Michael A.


Wed Oct 12, 2016 3:25 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 2 posts ] 

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software