View unanswered posts | View active topics It is currently Mon Sep 23, 2019 1:37 pm



Reply to topic  [ 5 posts ] 
 Ide68k C compiler 
Author Message

Joined: Tue Dec 11, 2012 3:41 am
Posts: 68
A while ago I downloaded Ide68k http://home.kpn.nl/pj.fondse/ide68k/index.html

Just recently I tried to poke with it a bit, and try to figure out how to compile some C code.
You need to start a project first, then you can select the cpu, and create a C file.
Once you written your C program you can press compile, which will convert the C code into assembly and add it to the asm file. When I tried it, every time I would compile it would just append the new code, so I would have to delete the old one manually. I would like to try how it performs, but the 68k sbc that I built a while ago is not in a pretty condition. + I was in a hurry to finish it, so the schematics are nonexistent.

Has anyone tried Ide68k, or has anyone a 68k machine on which could test some compiled C code?


Wed Jul 16, 2014 7:38 pm
Profile

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1258
Haven't got a machine to test (well, I own a couple of Amigas but have no display for them) - have you considered testing in an emulator? Bochs can emulate 68000 I think, or http://sourceforge.net/projects/aranym/ for example emulates an Atari 68k.

Cheers
Ed


Thu Jul 17, 2014 4:56 pm
Profile

Joined: Sat Dec 23, 2017 2:01 am
Posts: 4
Hi, I'm new here. I used EASy68K tool for my 68K projects this year, but now I want to work with C and multitask OS. I want to follow up on IDE68K which has an updated version, 3.0. I'm able to load the S record generated by IDE68K and run it on my 68K boards using HyperTerminal, but I'm not able to talk to my hardware directly using IDE68K's terminal emulation--it will generate lots of garbage characters and then lockup IDE68K software. Does anyone know what kinda communication protocol the IDE68k's terminal emulation expects? I did sent Peter Fondse an email a couple weeks ago, but no reply.

My 68K hardware are Tiny68K & repurposed SPX-MPU board.
https://www.retrobrewcomputers.org/doku ... bc:tiny68k
https://www.retrobrewcomputers.org/doku ... sbc:mpu302

Bill


Sat Dec 23, 2017 2:16 am
Profile

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1258
Sometimes the receiver is overrun when the sender goes too fast - have you a terminal program which can pace the output?

A bit of searching suggests HyperTerminal can pace on a line-by-line basis, and TeraTerm can also pace on a character-by-character basis.

A more basic possibility is that you have a mismatch of bit rate, or number of stop bits, or even parity.


Sat Dec 23, 2017 8:08 am
Profile

Joined: Sat Dec 23, 2017 2:01 am
Posts: 4
I'm afraid I didn't state my problem with IDE68K very well. I can compile C program on IDE68K and then download it to my hardware using a standard terminal program like HyperTerminal or TeraTerm without any issues. IDE68K also has a terminal program built in. It can be set to different baud rate, comm ports, and other properties like a regular terminal program. However, when I try to communicate to my hardware via the IDE68K's terminal program, it displays garbage characters and crashes.
This morning I hooked up two com ports with a null modem. My regular HyperTerminal runs one of ther comm port while the other comm port is connected to IDE68K's terminal program. I find that HyperTerminal can receive data from IDE68K's terminal program, but transmit just a single character from HyperTerminal to IDE68K's terminal will cause multiple garbage characters to be displayed on the IDE68K terminal and crashed IDE68K.
For now I use IDE68K to compile C programs and download the binaries using a third-party terminal program. This is a workable solution for now.
Bill


Sat Dec 23, 2017 2:35 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software