View unanswered posts | View active topics It is currently Fri Jul 19, 2019 4:45 pm



Reply to topic  [ 3 posts ] 
 fpga emulation of a 68000-based HP9816 
Author Message

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1202
Olivier De Smet has a number of software emulations of HP calculators and computers, and also two or three FPGA emulations. This one has a new, small, and efficient 68k core with a GPL license:

Quote:
First, the 68000 softcore
- tg68 don't do movep and chk ... needed
- ao68 too large (more than 40KB of microcode ...) I need the onboard ram for other things
- suska core too large (more than 6000 slices)

So I wrote mine :)
- not cycle exact core
- all illegal are ok,
- movep and chk ok,
- mul and div WAY faster
- 32 bits internal alu
- 16 bits external bus
- generally less cycle used
- seem to work up to 16 MHz and use around 3000 slices
still in debug


https://sites.google.com/site/olivier2s ... pga-hp98x6

Attachment:
boot-03.jpg
boot-03.jpg [ 237.23 KiB | Viewed 4613 times ]

Quote:
The small basic program show that my softcore at 8 MHz is roughly a 11 MHz 68000 :)
(and with slow ram, with a 16Mhz internal wait state)


Mon Dec 23, 2013 1:58 pm
Profile

Joined: Tue Dec 11, 2012 8:03 am
Posts: 265
Location: California
Olivier is one of a many amazing brains on the HP Museum forum which was recently moved to http://www.hpmuseum.org/forum/ in its new phpBB format. The non-forum part of the website is http://www.hpmuseum.org/ . A few of these men have used programmable logic and microcontrollers to make HP-41 (my main interest there) calculator modules and transplant boards that dramatically increase the calculator's capabilities beyond what HP ever provided when the 41 was in production. I want to get Diego's NoV-64 module which gives a dramatic expansion of RAM and ROM (flash), and load into it several older module images plus Ángel Martin's new 41z module which gives it a native complex stack and oodles and oodles of complex-number functions all written in assembly for best performance (unlike the Advantage module which had some of its functions in user language) and his Sandmath module image. He also has a Sandmatrix and another one or two. Even the manuals are outstanding, which is uncommon today. The 41CL is a transplant board you can put in the earlier (Coconut) HP-41's to replace the original board. It does not have an actual Nut processor, but emulates it, with, I believe, a microcontroller, at up to 50 times the speed of the original. It is a true emulation that allows plugging in the older hardware modules (such as the time module, bar-code wand, HPIL, etc.), and comes with the ROM images of over 180 modules already installed. Doing a "who's who" of the HP Museum forum would take some time, and I'm sure I'd leave out someone important.

_________________
http://WilsonMinesCo.com/ lots of 6502 resources


Mon Dec 23, 2013 9:04 pm
Profile WWW

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1202
Very interesting! The CPU itself is documented at http://www.systemyde.com/pdf/newt.pdf - it's a version of HP's NUT, constructed from public information, so there's no extra layer of emulation. Sources are available too (but it's not open-source) - see http://systemyde.com/hp41/hardware.html


Sat Dec 28, 2013 10:29 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 3 posts ] 

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software