Last visit was: Tue Aug 04, 2020 2:08 am
It is currently Tue Aug 04, 2020 2:08 am



 [ 5 posts ] 
 G-DOS 
Author Message
User avatar

Joined: Sat Aug 10, 2019 1:13 am
Posts: 7
Hello all,
I just want to share the hobby OS that I've been developing over the past year and a half: G-DOS

Link to the G-DOS GitHub repository

It's a 32-bit ROM-native OS that I initially made for my m68k/68030 based homebrew computer.
I designed it with portability in mind; it currently supports the m68k, arm, and PowerPC architectures, with 6+ platforms implemented.

Some highlights:
Custom libc, shell, and machine monitor
Disk drivers for ATA, ramdisks, and romdisks
ISA driver for CGA graphics output
PS/2 Keyboard driver, and several serial drivers

I've treated G-DOS as my sandbox for playing with various random ideas. It's not intended to be a serious OS for real use, but more as a playground for my low-level coding.
If you want to try running G-DOS, there are instructions on the GitHub page. I warn that I haven't tested the build system for portability that much, and it will probably have cause trouble.

I'm sharing this mostly as a resource for others, since it targets more esoteric hardware.


Mon Apr 27, 2020 12:44 pm WWW

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1430
Bravo! Thanks for sharing. A portable OS for anything with a C compiler, more or less?


Mon Apr 27, 2020 1:40 pm
User avatar

Joined: Sat Aug 10, 2019 1:13 am
Posts: 7
Thanks!

Yes, that's the general idea. I put a lot of work into architecture independence.
I can usually port it to new architectures and platforms in just a few hours work.


Mon Apr 27, 2020 2:18 pm WWW

Joined: Mon Oct 07, 2019 2:41 am
Posts: 117
I got a 24 bit cpu ... and 6 bit FEILD DATA bytes . Is your OS really portable?
Will it fit in 32K words? Joking aside. Most cpu's now days tend all to be the same
8 bit bytes. 32 or 64 bit ints. Large virtual memory. I tend to feel what makes
a system portable is the C compiler. If you can't port that and self comple on your system
you don't have a portable system.
I have nice 32 bit CPU (DE1 FPGA) but no C compiler or software, just paper tape loader
at the moment. The design is LS TTL from about 1978 time frame with 128KB of memory
and serial I/O. OS/32KB HEAP 32KB RAM 64K, unsigned bytes only. My problem is finding SMALL software.


Mon Apr 27, 2020 6:45 pm
User avatar

Joined: Sat Aug 10, 2019 1:13 am
Posts: 7
Its as portable as I could make it without compromising my sanity :D.
I agree that its not true portability if it's not self hosting. Since I'm not too focused about porting other software to it at the moment, it might be a while before I can be truly portable.
When I started the project, I was focused on the commercial 16-bit CPUs of the home computer era (specifically the m68k), which influenced what I was willing to work with compatibility wise
G-DOS can boot on systems using as little as 16KB of RAM, since its designed to run directly from the ROM of system.


Mon Apr 27, 2020 9:22 pm WWW
 [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software