AnyCPU http://anycpu.org/forum/ |
|
8080 SBC with tiny floating point Basic http://anycpu.org/forum/viewtopic.php?f=22&t=234 |
Page 1 of 1 |
Author: | BigEd [ Mon Jul 20, 2015 10:08 am ] |
Post subject: | 8080 SBC with tiny floating point Basic |
Dave Banks was given this 1978ish 8080 development system, and has been trying to get it working and explore what it can do. It has an 8080 (needs ±12V as well as 5V) 4k of ROM implemented with 4 chips and 1k of RAM implemented with 8 chips. There's a UART, and Dave was able to talk to the Basic - a 4k Basic with floating point! Dave's dumped the ROMs and I was able to run the Basic interpreter using Óscar Toledo Gutiérrez' wonderful IOCCC-winning 8080 emulator - itself smaller than 4k. The adventure continues - the machine is sickly and the ROMs only work with lots of freezer spray. Others have turned up the original monitor for the machine - the tiny Basic has a peek and poke facility and a USR command but there's no monitor. BTW the machine has a video output card, which is serial-connected using another UART (1200bps) and which has just 1k of 6-bit wide memory and a character generator ROM for an Apple I or II - apparently a standard part, offering just 64 characters in a 5x7 matrix. For details of the adventure, see http://stardot.org.uk/forums/viewtopic.php?f=3&t=9821 (Reposted from here - be sure to keep an eye on Retro Computing over at gplus) |
Page 1 of 1 | All times are UTC |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |