Last visit was: Sun Nov 28, 2021 12:04 pm
It is currently Sun Nov 28, 2021 12:04 pm



 [ 1 post ] 
 HP's 32 bit MPU, computer and OS from 1981 
Author Message

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1644
There's lots of interesting technical detail about HP's first workstation, the 520, later called the 9000/520, in some issues of HP Journal.

The (microcoded) CPU was called FOCUS, and had 450,000 transistors, running at 18MHz and a million instructions per second, at a time when Intel and Bell Labs were announcing 32 bit CPUs with a tenth as many. There were heat management challenges.

The system allows for symmetric multiprocessing and independent I/O processors all on the same shared memory.

First issue, about the CPU and the system around it, going into great detail on the micro architecture, instruction set design, the chip process, the RAM chips they designed specially for this system, the clock distribution, managing the heat... see p27 for the design rules, which were very dense, allowing for contacts over gates and needing no contact surrounds:
http://www.hpl.hp.com/hpjournal/pdfs/Is ... 983-08.pdf

Two further issues have articles about the computer product:
- about the physical design, production engineering:
http://www.hpl.hp.com/hpjournal/pdfs/Is ... 984-03.pdf

- about the software including HP-UX and the SUN kernel which sits under it:
http://www.hpl.hp.com/hpjournal/pdfs/Is ... 984-05.pdf

(More info at my post here.)

Attachment:
FOCUS-block-diagram.png


Attachment:
FOCUS-registers.png


You do not have the required permissions to view the files attached to this post.


Fri Feb 17, 2017 4:45 am
 [ 1 post ] 

Who is online

Users browsing this forum: CCBot and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software