Last visit was: Sat Jul 31, 2021 6:36 am
It is currently Sat Jul 31, 2021 6:36 am



 [ 3 posts ] 
 Teensy 4.0 - 600MHz ARM Cortex M7 dev-board 
Author Message

Joined: Mon Aug 14, 2017 8:23 am
Posts: 156
Hi All,

It's never been easier to get hold of a fast microcontroller in a breadboard friendly package.

The Teensy 4.0 was announced about a week ago and comes in a 24 pin DIP module.

It's based on the NXP 600MHz Cortex M7 and sells for $19.95.

With 2MB of flash and 1MB of RAM it's a useful board for proving ideas, or possibly emulating your favorite retrocomputer. Bit-banging VGA should be a breeze for a processor of this spec.

More details here: https://www.pjrc.com/store/teensy40.html

Brief Spec.

ARM Cortex-M7 at 600 MHz
1024K RAM (512K is tightly coupled)
2048K Flash (64K reserved for recovery & EEPROM emulation)
2 USB ports, both 480 MBit/sec
3 CAN Bus (1 with CAN FD)
2 I2S Digital Audio
1 S/PDIF Digital Audio
1 SDIO (4 bit) native SD
3 SPI, all with 16 word FIFO
3 I2C, all with 4 byte FIFO
7 Serial, all with 4 byte FIFO
32 general purpose DMA channels
31 PWM pins
40 digital pins, all interrupt capable
14 analog pins, 2 ADCs on chip
Cryptographic Acceleration
Random Number Generator
RTC for date/time
Programmable FlexIO
Pixel Processing Pipeline
Peripheral cross triggering
Power On/Off management


Fri Aug 16, 2019 4:59 pm

Joined: Wed Jan 09, 2013 6:54 pm
Posts: 1626
Oh, that's quite the step up in performance! And with the tightly coupled RAM, even more so. Should be easily fast enough to emulate a RAM/ROM expansion of one sort or another, or any other interesting 8-bit peripheral. Or, as you suggest, a whole system.

But - as expected these days - not 5V tolerant.


Fri Aug 16, 2019 6:05 pm

Joined: Mon Aug 14, 2017 8:23 am
Posts: 156
Hi Ed,

Teensy 4.0 and 4.1 are now available in the UK from CoolComponents, Pimoroni, PiHut and HobbyTronics.

Check the PJRC site for a full list of their Worldwide Distributors.

Priced at between £18 and £29 they offer a small breadboard friendly form factor and at 600MHz at least 150% of the performance of the STM32H7xx devices.

With use of a suitable heatsink on the SoC they can be pushed to just over 1 GHz.

Needless to say I have ordered a small handful to continue with my cpu simulation explorations.

I opted for CoolComponents

https://coolcomponents.co.uk/products/t ... ment-board

but PiMoroni is almost the same cost - and they also offer the PSRAM chipped needed to expand the RAM on the Teensy 4.1 to either 8Mbyte or 16Mbyte

https://shop.pimoroni.com/products/8mb- ... teensy-4-1

As mentioned earlier on this forum the spec and features on these boards is awesome, and if you wish you can get as close to the metal as you wish.

PS - it's not a Raspberry Pi - so please don't offer any comparisons - they are chalk and cheese.


regards


Ken


Wed Sep 09, 2020 3:22 pm
 [ 3 posts ] 

Who is online

Users browsing this forum: CCBot and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
Designed by ST Software